Silicone mold - Cute Bat 3D
Cute Bat 3D silicone mold, soap mold, candle mould, cute, cartoon, Gothic, flittermouse, rearmouse, vampire, Dracula
This adorable 3D silicone bat mold is perfect for creating a variety of unique and spooky crafts. Whether you're making handmade soaps, candles, or concrete figurines, this versatile mold will allow you to add a touch of gothic charm to your projects.
Dimensions:
-
Finished product weight (candle): 45g (1.6 oz)
-
Height: 58mm (2.2 inches)
-
Width: 80mm (3.1 inches)
-
Length: 50mm (2 inches)
Ideal for:
-
Halloween: Create spooky soap favors, haunted house decorations, or ghostly candles.
-
Gothic decor: Add a touch of darkness to your home with unique bat-shaped objects.
-
Gifts: Surprise your friends and family with handmade, personalized gifts featuring a cute bat design.
-
Parties: Use bat-shaped treats to decorate your next Halloween or gothic-themed party.
Instructions for making a candle:
-
Prepare your workspace: Ensure your workspace is clean and dry.
-
Mix your wax: Melt your chosen wax according to the manufacturer's instructions. Be cautious not to overheat the wax.
-
Add color and scent: If desired, add your preferred color and fragrance oils to the melted wax. Stir gently to combine.
-
Prepare the mold: Thoroughly clean and dry the silicone mold.
-
Pour the wax: Carefully pour the melted wax into the mold, filling it to your desired level.
-
Add a wick: Center a pre-tabbed wick in the mold and secure it with a dab of hot glue.
-
Allow to cool: Let the wax cool and harden completely before removing the candle from the mold.
-
Trim the wick: Once the candle is fully set, trim the wick to about 1/4 inch.
Care instructions:
-
Wash the mold with warm, soapy water before and after each use.
-
Avoid using abrasive cleaners or sharp objects on the mold.
-
Store the mold in a cool, dry place away from direct sunlight.
Ready product | |
The weight of the finished product | 45 gram (1.6 oz) |
Height: | 55 millimeters (2,2 inch) |
Length: | 80 millimeters (3,2 inch) |
Width: | 50 millimeters (2 inch) |
Mold | |
Material | Silicone |
Thermal stability: | -50 - +250°C |
Presence of sections | Several cuts to simplify the extraction of the finished product. |
Storage and care. | |
Storage and use | storage and care of silicone molds |