Silicone mold - Snowman in a hat and scarf 100mm - for making soaps, candles and figurines
Silicone Mold - Snowman in a Hat and Scarf (100mm)
Ideal for creative crafting! This silicone mold from ManuArt is designed for making unique candles, soap, plaster, epoxy resin, and more. Made from food-grade silicone, this mold is suitable for working with chocolate, sugar, fondant, and other edible products.
The mold features a convenient and damage-free slit for easy extraction of the finished product.
Candle Making Process:
- Select the location for the wick and insert it into the mold.
- Precisely connect the mold at the slit and secure it with rubber bands.
- Fasten the second end of the wick with a slight tension.
- Pour melted wax at the correct temperature (note: improper temperature may result in stripes, unfilled areas, or excessive shrinkage).
- Wait for the wax to fully cool, then carefully extract the finished candle from the mold.
Note: Adjust the temperature individually for each type of wax to avoid defects.
Mold Quality:
The mold is crafted from durable and elastic silicone, capable of withstanding numerous casts with proper usage and storage. Avoid using sharp objects that may damage the mold.
Do not subject the mold to prolonged thermal stress. It is suitable for casting hot materials heated up to 250 degrees but is not suitable for baking in the oven at the same temperature.
Store the mold in a position that prevents deformation - do not stack other molds on top and remove rubber bands after use.
| Ready product | |
| The weight of the finished product | 165 gram (5.82 oz) |
| Height: | 100 millimeters (4 inch) |
| Length: | 65 millimeters (2,6 inch) |
| Width: | 65 millimeters (2,6 inch) |
| Mold | |
| Material | Silicone |
| Thermal stability: | -50 - +250°C |
| Presence of sections | Several cuts to simplify the extraction of the finished product. |
| Storage and care. | |
| Storage and use | storage and care of silicone molds |
- Product Code: 001567
-
24.00€
Attention!
All molds are made to order, the production time is usually 3-14 days. But in the case of the queue for the manufacture of this mold, the production time may be increased. Always I do everything to mold was made in the shortest possible time.
