Ghost Mold for Candle, Twisted Halloween Taper in Wax, Plaster, gothic Silicone Mould has the following finished candle size:
• Approximate weight: 60 g / 2.1 oz
• Height: 200 mm / 7.87 inch
• Width: 30 mm / 1.18 inch
• Length: 33 mm / 1.30 inch
• Base diameter: 20 mm / 0.79 inch
• The 20 mm base is designed to fit compatible taper candle holders
• This mold has 1 cut for easier demolding
• With each cut mold, we include rubber bands to hold the mold together during casting
Material and Key Info
• Made of high-quality food grade silicone
• Shore hardness: 10–15 A
• Best suited for: taper candles, decorative wax projects, plaster figures, and resin decor
• Suitable for: wax, soap, plaster, resin, concrete, clay, ice, chocolate, fondant, and marzipan
• Not suitable for: baking or oven use
• Temperature range: –50°C to +230°C (–58°F to +446°F)
• Flexible, durable, and tear-resistant
• Designed for long-term, repeated use
• High detail resolution for crisp, professional results
• Produced using vacuum equipment for consistent casting quality
Care and Storage
• Clean the mold gently with a soft sponge and mild detergent after use, making sure no wax, plaster, or pigment remains inside the spiral folds
• Do not use sharp tools, knives, metal picks, or abrasive pads, as they may damage the silicone surface and the edges of the cut
• Open the cut carefully and peel the silicone away from the finished figure instead of pulling the casting by its narrow base
• Place the included rubber bands evenly around the mold during casting to keep the seam aligned, but do not tighten them excessively
• Support the mold in an upright position while pouring because the tall, narrow shape may tilt if placed on an unstable surface
• Avoid stretching or twisting the hood, face opening, and spiral details unnecessarily to help preserve their original shape
• Keep the mold away from direct sunlight, radiators, and strong heat sources to reduce silicone aging over time
• Store the mold in its natural shape without folding or compressing the 20 mm base
• Make sure the mold is completely dry before storage to prevent dust and unwanted residue from collecting inside
• Do not expose the mold to open flame or place it directly on heating elements
Product Description
This ghost mold turns a classic taper candle into a tall hooded figure with a hollow face and flowing spiral folds. The finished candle stands 200 mm high, while the 20 mm base is shaped to fit compatible candle holders, so the piece can be displayed as a functional candle rather than only as a sculpture.
The design works especially well for Halloween tables, gothic interiors, themed dinners, altar arrangements, and handmade seasonal collections. As a ghost candle mold and twisted candle mold, it gives wax a strong silhouette without making the finished piece look overloaded. The single cut helps release the narrow body and detailed hood while keeping the spiral form clean.
Use the ghost silicone mold with soy wax, beeswax, paraffin, or blended candle wax. It can also produce plaster or resin figures for shelf decor, photography props, and small-batch craft collections. The shape feels eerie but refined, making it suitable for makers who want a spooky candle mold that still looks carefully designed and easy to display.
Suitable for Holidays and Occasions
• Halloween parties and home decor: use the halloween candle mold to create tall ghost tapers for dining tables, mantel displays, themed dinners, and atmospheric seasonal arrangements.
• Autumn markets and craft fairs: the spooky candle mold gives small-batch candle collections a recognizable silhouette that photographs well and stands out without relying on extra decoration.
• Gothic weddings and dark romantic events: a gothic candle mold can create coordinated table candles, ceremony accents, or handmade favors with an unusual sculptural shape and a clean 20 mm base.
• Ritual and spiritual settings: the witchcraft mold is suitable for symbolic candles, altar arrangements, intention work, and seasonal displays where a hooded figure adds a quiet, mysterious presence.
• Horror-themed birthdays and movie nights: the creepy candle mold can be used for memorable table decor, handmade gifts, or display pieces that fit a dramatic theme without looking like a novelty toy.
Can Be Used For
• Candle making — Best suited to soy wax, beeswax, paraffin, and blended waxes. The taper candle mold creates a 200 mm figure with a 20 mm base for compatible candle holders.
• Plaster casting — Use the ghost mold for decorative figures, paintable ornaments, shelf accents, and seasonal displays. Support the tall mold upright while pouring to keep the shape aligned.
• Resin casting — The spiral candle mold can also produce glossy or matte figurines, photography props, and gothic decor. Allow the resin to cure fully before opening the cut and demolding.
• Concrete crafts — Fine casting concrete can be used for a narrow sculptural figure or weighted table decoration. Secure the cut carefully and keep the mold supported throughout the pour.
• Soap making — Suitable for decorative melt-and-pour or cold-process soap when the formula releases cleanly. Because the figure is tall and narrow, demold slowly and allow sufficient curing time.
• Clay and polymer clay — Use for cast or pressed decorative figures. Remove polymer clay from the mold before heat curing, because the mold is not intended for baking or oven use.
• Chocolate, fondant, marzipan, and ice — Food-safe projects are possible with cold-set materials only. Keep a separate mold for food use and never reuse one that has held resin, plaster, or concrete.
• Approximate weight: 60 g / 2.1 oz
• Height: 200 mm / 7.87 inch
• Width: 30 mm / 1.18 inch
• Length: 33 mm / 1.30 inch
• Base diameter: 20 mm / 0.79 inch
• The 20 mm base is designed to fit compatible taper candle holders
• This mold has 1 cut for easier demolding
• With each cut mold, we include rubber bands to hold the mold together during casting
Material and Key Info
• Made of high-quality food grade silicone
• Shore hardness: 10–15 A
• Best suited for: taper candles, decorative wax projects, plaster figures, and resin decor
• Suitable for: wax, soap, plaster, resin, concrete, clay, ice, chocolate, fondant, and marzipan
• Not suitable for: baking or oven use
• Temperature range: –50°C to +230°C (–58°F to +446°F)
• Flexible, durable, and tear-resistant
• Designed for long-term, repeated use
• High detail resolution for crisp, professional results
• Produced using vacuum equipment for consistent casting quality
Care and Storage
• Clean the mold gently with a soft sponge and mild detergent after use, making sure no wax, plaster, or pigment remains inside the spiral folds
• Do not use sharp tools, knives, metal picks, or abrasive pads, as they may damage the silicone surface and the edges of the cut
• Open the cut carefully and peel the silicone away from the finished figure instead of pulling the casting by its narrow base
• Place the included rubber bands evenly around the mold during casting to keep the seam aligned, but do not tighten them excessively
• Support the mold in an upright position while pouring because the tall, narrow shape may tilt if placed on an unstable surface
• Avoid stretching or twisting the hood, face opening, and spiral details unnecessarily to help preserve their original shape
• Keep the mold away from direct sunlight, radiators, and strong heat sources to reduce silicone aging over time
• Store the mold in its natural shape without folding or compressing the 20 mm base
• Make sure the mold is completely dry before storage to prevent dust and unwanted residue from collecting inside
• Do not expose the mold to open flame or place it directly on heating elements
Product Description
This ghost mold turns a classic taper candle into a tall hooded figure with a hollow face and flowing spiral folds. The finished candle stands 200 mm high, while the 20 mm base is shaped to fit compatible candle holders, so the piece can be displayed as a functional candle rather than only as a sculpture.
The design works especially well for Halloween tables, gothic interiors, themed dinners, altar arrangements, and handmade seasonal collections. As a ghost candle mold and twisted candle mold, it gives wax a strong silhouette without making the finished piece look overloaded. The single cut helps release the narrow body and detailed hood while keeping the spiral form clean.
Use the ghost silicone mold with soy wax, beeswax, paraffin, or blended candle wax. It can also produce plaster or resin figures for shelf decor, photography props, and small-batch craft collections. The shape feels eerie but refined, making it suitable for makers who want a spooky candle mold that still looks carefully designed and easy to display.
Suitable for Holidays and Occasions
• Halloween parties and home decor: use the halloween candle mold to create tall ghost tapers for dining tables, mantel displays, themed dinners, and atmospheric seasonal arrangements.
• Autumn markets and craft fairs: the spooky candle mold gives small-batch candle collections a recognizable silhouette that photographs well and stands out without relying on extra decoration.
• Gothic weddings and dark romantic events: a gothic candle mold can create coordinated table candles, ceremony accents, or handmade favors with an unusual sculptural shape and a clean 20 mm base.
• Ritual and spiritual settings: the witchcraft mold is suitable for symbolic candles, altar arrangements, intention work, and seasonal displays where a hooded figure adds a quiet, mysterious presence.
• Horror-themed birthdays and movie nights: the creepy candle mold can be used for memorable table decor, handmade gifts, or display pieces that fit a dramatic theme without looking like a novelty toy.
Can Be Used For
• Candle making — Best suited to soy wax, beeswax, paraffin, and blended waxes. The taper candle mold creates a 200 mm figure with a 20 mm base for compatible candle holders.
• Plaster casting — Use the ghost mold for decorative figures, paintable ornaments, shelf accents, and seasonal displays. Support the tall mold upright while pouring to keep the shape aligned.
• Resin casting — The spiral candle mold can also produce glossy or matte figurines, photography props, and gothic decor. Allow the resin to cure fully before opening the cut and demolding.
• Concrete crafts — Fine casting concrete can be used for a narrow sculptural figure or weighted table decoration. Secure the cut carefully and keep the mold supported throughout the pour.
• Soap making — Suitable for decorative melt-and-pour or cold-process soap when the formula releases cleanly. Because the figure is tall and narrow, demold slowly and allow sufficient curing time.
• Clay and polymer clay — Use for cast or pressed decorative figures. Remove polymer clay from the mold before heat curing, because the mold is not intended for baking or oven use.
• Chocolate, fondant, marzipan, and ice — Food-safe projects are possible with cold-set materials only. Keep a separate mold for food use and never reuse one that has held resin, plaster, or concrete.
| Ready product | |
| The weight of the finished product | 60 gram (2.12 oz) |
| Height: | 200 millimeters (7,9 inch) |
| Length: | 35 millimeters (1,4 inch) |
| Width: | 30 millimeters (1,2 inch) |
| Mold | |
| Material | Silicone |
| Thermal stability: | -50 - +250°C |
| Presence of sections | 1 cut |
| Storage and care. | |
| Storage and use | storage and care of silicone molds |