Silicone Mold Buddha Eyes has the following finished relief bar dimensions:
• Approx. finished candle weight: 110 g / 3.9 oz
• Height: 85 mm / 3.3 in
• Width: 50 mm / 2.0 in
• Depth: 25 mm / 1.0 in
Material and Key Info
• Made of high-quality flexible silicone
• Shore hardness: 10–15 A
• Flexible construction supports gradual, controlled demolding
• Not suitable for baking or oven use
• Temperature range: –50°C to +230°C (–58°F to +446°F)
• Designed for repeated casting use with proper care and storage
• Detailed silicone surface can transfer fine surface texture
• Produced using vacuum equipment for consistent mold quality
• Well-suited for soap making, wax casting, and mineral plaster projects
Care and Storage
• Clean gently with warm water, mild dish soap, and a soft sponge
• Avoid using sharp tools, knives, or abrasive pads inside the cavity
• Allow casting materials to sufficiently set, cool, or cure before demolding
• Peel the flexible silicone edges outward along the perimeter to release the casting
• Dry completely before storing in a clean, dust-free environment
• Store flat in its natural shape away from prolonged direct sunlight
Product Description
This silicone mold features a rectangular bar design with a deeply sculpted relief depicting serene, closed eyes, soft brow arches, the upper bridge of a nose, and a central dot between the eyebrows. The outer form maintains clean rectangular lines, while the central motif provides smooth, meditative facial contours that create subtle highlights and shadows on finished pieces.
This listing is for the silicone mold only. Finished castings are not included.
The mold cavity is designed as an open-top block, making pouring and leveling straightforward across a variety of casting mediums. For soap making, firm soap bases release cleanly when allowed to harden fully, keeping the smooth curved eyelids and brow lines intact. When casting with plaster or mineral compounds, gently tapping the filled mold helps release small air bubbles that might otherwise collect around the recessed eyelids or nose bridge.
Suitable for Holidays and Occasions
• Spa, wellness, and meditation-themed handmade gift sets
• Artisan craft fairs focused on holistic, yoga, or relaxation decor
• Year-round decorative accents for tranquil home interiors
Can Be Used For
• Soap making - shaping sculptural bars with smooth facial relief contours.
• Plaster and gypsum casting - forming decorative relief plaques suitable for shelf or tabletop display.
• Wax casting - creating solid wax blocks or decorative melt tablets for ambient displays.
• Resin casting - producing decorative tiles with defined surface relief when cast with suitable deep-pour systems.
• Approx. finished candle weight: 110 g / 3.9 oz
• Height: 85 mm / 3.3 in
• Width: 50 mm / 2.0 in
• Depth: 25 mm / 1.0 in
Material and Key Info
• Made of high-quality flexible silicone
• Shore hardness: 10–15 A
• Flexible construction supports gradual, controlled demolding
• Not suitable for baking or oven use
• Temperature range: –50°C to +230°C (–58°F to +446°F)
• Designed for repeated casting use with proper care and storage
• Detailed silicone surface can transfer fine surface texture
• Produced using vacuum equipment for consistent mold quality
• Well-suited for soap making, wax casting, and mineral plaster projects
Care and Storage
• Clean gently with warm water, mild dish soap, and a soft sponge
• Avoid using sharp tools, knives, or abrasive pads inside the cavity
• Allow casting materials to sufficiently set, cool, or cure before demolding
• Peel the flexible silicone edges outward along the perimeter to release the casting
• Dry completely before storing in a clean, dust-free environment
• Store flat in its natural shape away from prolonged direct sunlight
Product Description
This silicone mold features a rectangular bar design with a deeply sculpted relief depicting serene, closed eyes, soft brow arches, the upper bridge of a nose, and a central dot between the eyebrows. The outer form maintains clean rectangular lines, while the central motif provides smooth, meditative facial contours that create subtle highlights and shadows on finished pieces.
This listing is for the silicone mold only. Finished castings are not included.
The mold cavity is designed as an open-top block, making pouring and leveling straightforward across a variety of casting mediums. For soap making, firm soap bases release cleanly when allowed to harden fully, keeping the smooth curved eyelids and brow lines intact. When casting with plaster or mineral compounds, gently tapping the filled mold helps release small air bubbles that might otherwise collect around the recessed eyelids or nose bridge.
Suitable for Holidays and Occasions
• Spa, wellness, and meditation-themed handmade gift sets
• Artisan craft fairs focused on holistic, yoga, or relaxation decor
• Year-round decorative accents for tranquil home interiors
Can Be Used For
• Soap making - shaping sculptural bars with smooth facial relief contours.
• Plaster and gypsum casting - forming decorative relief plaques suitable for shelf or tabletop display.
• Wax casting - creating solid wax blocks or decorative melt tablets for ambient displays.
• Resin casting - producing decorative tiles with defined surface relief when cast with suitable deep-pour systems.
| Ready product | |
| The weight of the finished product | 110 gram (3.88 oz) |
| Thickness | 30 millimeters |
| Length: | 90 millimeters (3,6 inch) |
| Width: | 50 millimeters (2 inch) |
| Mold | |
| Material | Silicone |
| Thermal stability: | -50 - +250°C |
| Storage and care. | |
| Storage and use | storage and care of silicone molds |
- Product Code: 1057
- Reward Points: 7
- Availability: In Stock
-
17.00 €
- Price in reward points: 140